Increasing strength of graphite/epoxy bolted joints by introducing an adhesively bonded metallic insert (Record no. 54821)
[ view plain ]
| 000 -LEADER | |
|---|---|
| fixed length control field | 01834nam a2200169Ia 4500 |
| 003 - CONTROL NUMBER IDENTIFIER | |
| control field | MX-MdCICY |
| 005 - DATE AND TIME OF LATEST TRANSACTION | |
| control field | 20250625162454.0 |
| 040 ## - CATALOGING SOURCE | |
| Transcribing agency | CICY |
| 090 ## - LOCALLY ASSIGNED LC-TYPE CALL NUMBER (OCLC); LOCAL CALL NUMBER (RLIN) | |
| Classification number (OCLC) (R) ; Classification number, CALL (RLIN) (NR) | B-20740 |
| 008 - FIXED-LENGTH DATA ELEMENTS--GENERAL INFORMATION | |
| fixed length control field | 250602s9999 xx |||||s2 |||| ||und|d |
| 245 10 - TITLE STATEMENT | |
| Title | Increasing strength of graphite/epoxy bolted joints by introducing an adhesively bonded metallic insert |
| 490 0# - SERIES STATEMENT | |
| Volume/sequential designation | Journal of Composite Materials, 23(7), p.642-650, 1989 |
| 520 3# - SUMMARY, ETC. | |
| Summary, etc. | In this paper a method to increase the failure load in graphite/epoxy bolted joints where the failure mode is bearing strength is proposed by bonding a metallic insert in the hole. In order to design test specimens with significantly reduced compressive stresses at the hole boundary, finite element (FE)analysis was performed. The FE analysis revealed the possibility to reduce the compressive stresses at the hole boundary in quasi-isotropic laminate by approximately 50 percent, if a 10 mm hole is enlarged to 14 mm and a 2 mm thick metallic insert is adhesively bonded in the hole. Experimental results showed an increased failure load of up to 55 percent when using an aluminum insert and 30 percent when using steel insert, the steel insert also giving a 13 percent stiffer joint. The adhesively bonded insert altered the failure mode to failure in the adhesive combined with net tension of the composite member. Further studies of FE-results explained the difference in failure load when using a steel or aluminum insert respectively by the fact that the stiffer steel insert causes higher tension stresses in the adhesive, which apperently leads to a primary tension failure in the adhe sive. |
| 700 12 - ADDED ENTRY--PERSONAL NAME | |
| Personal name | Nilsson, S. |
| 856 40 - ELECTRONIC LOCATION AND ACCESS | |
| Uniform Resource Identifier | <a href="https://drive.google.com/file/d/1gdH1EpujUbKJZ161MIIXTUXnxlj8eGS8/view?usp=drivesdk">https://drive.google.com/file/d/1gdH1EpujUbKJZ161MIIXTUXnxlj8eGS8/view?usp=drivesdk</a> |
| Public note | Para ver el documento ingresa a Google con tu cuenta: @cicy.edu.mx |
| 942 ## - ADDED ENTRY ELEMENTS (KOHA) | |
| Source of classification or shelving scheme | Clasificación local |
| Koha item type | Documentos solicitados |
| Lost status | Source of classification or shelving scheme | Damaged status | Not for loan | Collection | Home library | Current library | Shelving location | Date acquired | Total checkouts | Full call number | Date last seen | Price effective from | Koha item type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Clasificación local | Ref1 | CICY | CICY | Documento préstamo interbibliotecario | 25.06.2025 | B-20740 | 25.06.2025 | 25.06.2025 | Documentos solicitados |