Image from Google Jackets

High Power Density from a Miniature Microbial Fuel Cell Using Shewanella oneidensis DSP10

Tipo de material: TextoTextoSeries ; Environ. Sci. Technol., 40(8), p.2629-2634, 2006Trabajos contenidos:
  • Ringeisen Br
  • Henderson E
  • Wu Pk
  • Pietron J
  • Ray R
  • Little B
  • Biffinger Jc
  • Biffinger Jc
Recursos en línea: Resumen: A miniature microbial fuel cell (mini-MFC)is described that demonstrates high output power per device crosssection (2.0 cm2)and volume (1.2 cm3).Shewanella oneidensis DSP10 in growth medium with lactate and buffered ferricyanide solutions were used as the anolyte and catholyte, respectively. Maximum power densities of 24 and 10 mW/m2 were measured using the true surface areas of reticulated vitreous carbon (RVC)and graphite felt (GF)electrodes without the addition of exogenous mediators in the anolyte. Current densities at maximum power were measured as 44 and 20 mA/m2 for RVC and GF, while short circuit current densities reached 32 mA/m2 for GF anodes and 100 mA/m2 for RVC. When the power density for GF was calculated using the cross sectional area of the device or the volume of the anode chamber, we found values (3 W/m2, 500 W/m3)similar to the maxima reported in the literature. The addition of electron mediators resulted in current and power increases of 30-100
Tags from this library: No tags from this library for this title. Log in to add tags.
Star ratings
    Average rating: 0.0 (0 votes)

A miniature microbial fuel cell (mini-MFC)is described that demonstrates high output power per device crosssection (2.0 cm2)and volume (1.2 cm3).Shewanella oneidensis DSP10 in growth medium with lactate and buffered ferricyanide solutions were used as the anolyte and catholyte, respectively. Maximum power densities of 24 and 10 mW/m2 were measured using the true surface areas of reticulated vitreous carbon (RVC)and graphite felt (GF)electrodes without the addition of exogenous mediators in the anolyte. Current densities at maximum power were measured as 44 and 20 mA/m2 for RVC and GF, while short circuit current densities reached 32 mA/m2 for GF anodes and 100 mA/m2 for RVC. When the power density for GF was calculated using the cross sectional area of the device or the volume of the anode chamber, we found values (3 W/m2, 500 W/m3)similar to the maxima reported in the literature. The addition of electron mediators resulted in current and power increases of 30-100

There are no comments on this title.

to post a comment.