000			01867nam a2200229Ia 4500
003			MX-MdCICY
005			20250625124656.0
040			_cCICY
090			_aB-7167
245	1	0	_aPoly(styrene-co-acrylonitrile)/montmorillonite organoclay mixtures: a model system for ABS nanocomposites
490	0		_vPolymer, 46, p.3818-3830, 2005
520	3		_aDispersion of clay particles in acrylonitrile-butadiene-styrene (ABS)and styrene-acrylonitrile copolymer (SAN)nanocomposites with montmorillonite (MMT)have been compared to assess whether ABS/MMT nanocomposite behavior can be adequately modeled using the simpler SAN/MMT system. Electron microscopy photomicrographs show that clay particles in ABS/MMT composites reside in the SAN matrix phase and accumulate at the rubber particle surfaces. In mixtures of four organoclays with the two polymers, WAXS (wide angle Xray scattering)peak height and shift in gallery height was the same for a given organoclay. Aspect ratios determined through image analysis were also the same in each polymer. Modulus enhancement as measured by an exfoliation efficiency index showed the same patterns for each organoclay in the two matrices, but the ABS/MMT composites had consistently lower efficiencies than in SAN/MMT composites. This trend is expected to be due to the variations in orientation of clay particles in ABS/MMT composites at the rubber particle surface. In summary, SAN/MMT composites represent a good model system for ABS/MMT.
650	1	4	_aABS
650	1	4	_aSAN
650	1	4	_aMONTMORILLONITE
700	1	2	_aStretz, H.A.
700	1	2	_aPaul, D.R.
700	1	2	_aCassidy, P.E.
856	4	0	_uhttps://drive.google.com/file/d/1Z4RkSmirao9RCf73jagHHphSn_GHCKPb/view?usp=drivesdk _zPara ver el documento ingresa a Google con tu cuenta: @cicy.edu.mx
942			_2Loc _cREF1
008			250602s9999 xx |||||s2 |||| ||und|d
999			_c41498 _d41498