000			02082nam a2200277Ia 4500
003			MX-MdCICY
005			20250625140651.0
040			_cCICY
090			_aB-11490
245	1	0	_aReview of the membrane and bipolar plates materials for conventional and unitized regenerative fuel cells
490	0		_vRenewable and Sustainable Energy Reviews, 13(6), p.1663-1668, 2009
520	3		_aFuel cell or hydrogen systems offer the potential for clean, reliable and on-site energy generation. This article review current literature with the objective of identifying the latest development in membrane and bipolar plates for the conventional fuel cell and unitized regenerative fuel cell (URFC). The result shows that the choice of both the bipolar plates and the catalysts for URFC electrodes is a delicate task, for bipolar plate the corrosion in the oxygen side will be the major problem and for the electrodes a very good candidate for fuel cell mode will not function well in the electrolyser mode and therefore it is suggested that a compromise should be considered. It is recommended that aluminum, titanium or for best results titanium with a gold-coated layer is a suitable candidate as the bipolar plate and Pt/IrOX or Pt/Ru is suitable for an oxygen side catalyst in the URFC. For the conventional fuel cell the task is more easer because the corrosion problem is no more effective and thus the main goals for most of the studies was to concentrate on bipolar plate cost reduction, increase electrical conduction and reducing the platinum loading rate for catalyst
650	1	4	_aFUEL CELL
650	1	4	_aBIPOLAR PLATE
650	1	4	_aUNITIZED
650	1	4	_aTITANIUM
650	1	4	_aMEMBRANE
650	1	4	_aCATALYST
700	1	2	_aDihrab, Salwan S.
700	1	2	_aSopian, K.
700	1	2	_aAlghoula, M.A.
700	1	2	_aSulaimana, M.Y.
856	4	0	_uhttps://drive.google.com/file/d/1SfXXf4WfpbaeVyQrWnbSi8Nv3H6vmWqa/view?usp=drivesdk _zPara ver el documento ingresa a Google con tu cuenta: @cicy.edu.mx
942			_2Loc _cREF1
008			250602s9999 xx |||||s2 |||| ||und|d
999			_c45706 _d45706