| 000 | 01155nam a2200253Ia 4500 | ||
|---|---|---|---|
| 003 | MX-MdCICY | ||
| 005 | 20250625153907.0 | ||
| 040 | _cCICY | ||
| 090 | _aB-12718 | ||
| 245 | 1 | 0 | _aMetal injection moulding of bronze using thermoplastic binder based on HDPE |
| 490 | 0 | _vPowder Metallurgy, 50(2), p.184-188, 2007 | |
| 520 | 3 | _aIn the present work, the injection moulding process of a Cu-10Sn bronze has been studied. Different formulations of binders based on high density polyethylene, paraffin wax and polyethylene glycol have been used. The optimisation of the metallic load is based on torque measurements and rheological studies. The optimum powder loading was 60 vol.- | |
| 650 | 1 | 4 | _aMETAL INJECTION MOULDING |
| 650 | 1 | 4 | _aBRONZE |
| 650 | 1 | 4 | _aTHERMOPLASTIC BINDER |
| 650 | 1 | 4 | _aSINTERING |
| 700 | 1 | 2 | _aHerranz, G. |
| 700 | 1 | 2 | _aVárez, A. |
| 700 | 1 | 2 | _aTorralba, J.M. |
| 700 | 1 | 2 | _aLevenfeld, B. |
| 856 | 4 | 0 |
_uhttps://drive.google.com/file/d/1cbWkKGrZcAD08tLGRowiup1QYcumKthO/view?usp=drivesdk _zPara ver el documento ingresa a Google con tu cuenta: @cicy.edu.mx |
| 942 |
_2Loc _cREF1 |
||
| 008 | 250602s9999 xx |||||s2 |||| ||und|d | ||
| 999 |
_c46925 _d46925 |
||