000			01639nam a2200229Ia 4500
003			MX-MdCICY
005			20250625153920.0
040			_cCICY
090			_aB-13318
245	1	0	_aCell Structure Evolution and the Crystallization Behavior of Polypropylene/Clay Nanocomposites Foams Blown in Continuous Extrusion
490	0		_vInd. Eng. Chem. Res., 49(20), p.9834-9845, 2010
520	3		_aIn this study, linear homopolypropylene/clay (HPPC)nanocomposite foams with a high expansion ratio of about 18 and a high cell density of about 1.7 _~ 108 cells/cm3 were produced using an extrusion foaming method with CO2 as the physical blowing agent. The result was much better than pure HPP foams with expansion ratios of 1.7-2.2 and cell densities of 103-105 cells/cm3 obtained even at the same foaming conditions. The nanoclays had a half-exfoliated structure in the HPP matrix, and their presence dramatically affected the viscoelastic properties of HPP melt and foaming behaviors. It was found that the introduction of a small amount of nanoclay significantly increased the cell morphology of HPP foams at low die temperatures, where the cell wall was very thin and cell distribution was uniform. With an increase in nanoclay content of up to 5 wt
700	1	2	_aZhai, W.
700	1	2	_aKuboki, T.
700	1	2	_aWang, L.
700	1	2	_aPark, C.B.
700	1	2	_aLee, E.K.
700	1	2	_aNaguib, H.E.
856	4	0	_uhttps://drive.google.com/file/d/1Z4zEIFtrcQ2CoI28BwhSI7Fl8wsxZbAq/view?usp=drivesdk _zPara ver el documento ingresa a Google con tu cuenta: @cicy.edu.mx
942			_2Loc _cREF1
008			250602s9999 xx |||||s2 |||| ||und|d
999			_c47518 _d47518