000			01689nam a2200181Ia 4500
003			MX-MdCICY
005			20250625153939.0
040			_cCICY
090			_aB-14299
245	1	0	_aCollector efficiency factor F'for absorbers with rectangular fluid ducts contacting the entire surface
490	0		_vSolar Energy, 60, p.199-207, 1997
520	3		_amost commonly used absorbers in flat-plate collectors are manufactured as finned tubes. In this article, an alternative design is investigated: the absorber consists of a rectangular, narrow duct, in which the fluid contacts the entire surface. Under the conditions of fully developed laminar flow and negligible heat resistance of the absorber plate material, relations are developed to calculate the temperature distribution within the fluid. These results are used to derive a formula for the collector efficiency factor F' of narrow-duct absorbers, which is then evaluated for water and a commonly used glycol antifreeze liquid as the collector fluid. Finally, the optimisation of narrow-duct absorbers is investigated with consideration of the thermal heat gained by the collector and primary energy consumed by the pump of the solar system due to the pressure drop in the absorber. It is concluded that duct heights in the range of 3-6 mm should be chosen. Collector efficiency factors F' around 0.98 may be expected. 0 1997 Elsevier Science Ltd.
700	1	2	_aRommel, M.
700	1	2	_aMoock, W.
856	4	0	_uhttps://drive.google.com/file/d/1Wpq1fguBc7xWwxonKU9VWvABiXqarLjK/view?usp=drivesdk _zPara ver el documento ingresa a Google con tu cuenta: @cicy.edu.mx
942			_2Loc _cREF1
008			250602s9999 xx |||||s2 |||| ||und|d
999			_c48493 _d48493