000 02198nam a2200277Ia 4500
003 MX-MdCICY
005 20250625160224.0
040 _cCICY
090 _aB-18132
245 1 0 _aFinite element evaluation of the microbond test: meniscus effect, interphase region, and vise angle.
490 0 _vComposites Science and Technology, 63(5), p.641-651, 2003
520 3 _aAn axisymmetric finite element model (FEM)was used to determine the stresses that develop during a microbond test of a glass fiber/polymer matrix composite system. The complete bead shape including the meniscus that occurs as the bead wets to the fiber was included in the FEM to determine the influence of the bead geometry on the resulting stresses. Significant differences in the stress fields were found near the fiber/bead contact point due to the geometry and resulting z-location of the vise. In addition, the vise angle and interphase properties were varied to examine their influence. As the vise angle increases, the combined state of stress decreases considerably. The effect of the interphase, while not as significant as the effect of the vise angle, did produce a 10 per cent variation in von-Mises stress at the fiber/bead contact point for the properties used. It was found that the ratio of the maximum shear to average shear equaled 4 near the fiber/bead contact point. At this location the interfacial material has yielded with a von-Mises stress 8× the average shear. Finally, results are provided showing the average interfacial shear stress value obtained by the FEM is within 2 per cent of the theoretical solution.
650 1 4 _aA. POLYMER-MATRIX COMPOSITES (PMCS)
650 1 4 _aB. INTERFACIAL STRENGTH
650 1 4 _aB. INTERPHASE
650 1 4 _aC. FINITE ELEMENT ANALYSIS (FEA)
650 1 4 _aD. MICROBOND TEST
700 1 2 _aAsh, J. T.
700 1 2 _aCross, W. M.
700 1 2 _aSvalstad, D.
700 1 2 _aKellar, J. J.
700 1 2 _aKjerengtroen, L.
856 4 0 _uhttps://drive.google.com/file/d/19wSPqa85nWBsSTECxpth_ofEcVwSR5DG/view?usp=drivesdk
_zPara ver el documento ingresa a Google con tu cuenta: @cicy.edu.mx
942 _2Loc
_cREF1
008 250602s9999 xx |||||s2 |||| ||und|d
999 _c52290
_d52290