000			02813nam a2200325Ia 4500
003			MX-MdCICY
005			20250625162457.0
040			_cCICY
090			_aB-20904
245	1	0	_aValorization of municipal solid waste incineration bottom ash (MSWIBA)into cold-bonded aggregates (CBAs): Feasibility and influence of curing methods
490	0		_vScience of The Total Environment, 843, p.157004, 2022
520	3		_aThe municipal solid waste incineration bottom ash (MSWIBA)contains amounts of hazardous elements or composition, and its disposal to landfills may pose a serious threat to the ground water and soil. To reduce the environmental impact of MSWIBA, a novelty application into the utilization of MSWIBA for the manufacture of cold-bonded aggregates (CBAs)was investigated in this study. This study explored the impacts of curing systems on the comprehensive properties of CBAs. Furthermore, the hydrating phases of the designed CBAs were studied by X-ray diffractometer, and the micro characteristics of CBAs was analyzed by Scanning Electron Microscopy. The results show that CBAs produced from the MSWIBA had good properties with density of 1.75-1.98 g/cm3, moisture content of 0.78-16.48 percent, water absorption of 3.99-14.02 percent and compressive behavior of 1.6-4.8 MPa. Moreover, the heating water curing environment can significantly improve the comprehensive properties of CBAs. Specifically, the compressive strength of the CBAs under the 80 °C curing condition was increased by 74 percent-113 percent, and the water absorption rate was reduced by 3.4 percent-8 percent, compared with other curing regimes. Additionally, the XRD analysis showed that there are spinel phases in the CBAs compounds, which is beneficial to solidify the hazardous metals. Also, low-carbon CBAs also greatly reduce the amount of Cu and Pb leaching, which meets the limit requirements in the Chinese standards. Overall, application of MSWIBA as admixture in CBAs is an effective approach to recycle waste and replace natural aggregates. Meanwhile, this work can provide an insight for the production of eco-friendly LWAs.
650	1	4	_aCOLD-BONDED AGGREGATES
650	1	4	_aCOMPRESSIVE BEHAVIOR
650	1	4	_aCURING METHODS
650	1	4	_aHEAVY METAL CONTENT
650	1	4	_aMUNICIPAL SOLID WASTE INCINERATION BOTTOM ASH
650	1	4	_aPHYSICAL AND MICRO PROPERTIES
650	1	4	_aWASTE RECYCLING
700	1	2	_aLiu, J.
700	1	2	_aLi, Z.
700	1	2	_aZhang, W.
700	1	2	_aJin, H.
700	1	2	_aXing, F.
700	1	2	_aChen, C.
700	1	2	_aWang, Y.
856	4	0	_uhttps://drive.google.com/file/d/1huzyyxseVqNSsP5RoKZXluQdvrh_UYzx/view?usp=drivesdk _zPara ver el documento ingresa a Google con tu cuenta: @cicy.edu.mx
942			_2Loc _cREF1
008			250602s9999 xx |||||s2 |||| ||und|d
999			_c54984 _d54984