| 000 | 03005nam a2200301Ia 4500 | ||
|---|---|---|---|
| 003 | MX-MdCICY | ||
| 005 | 20250625164351.0 | ||
| 040 | _cCICY | ||
| 090 | _aB-21230 | ||
| 245 | 1 | 0 | _aNumerical analysis of the relation between the porosity of the fuel electrode support and functional layer, and performance of solid oxide fuel cells using computational fluid dynamics |
| 490 | 0 | _aInternational Journal of Hydrogen Energy. 52, 936-951, 2024, DOI: 10.1016/j.ijhydene.2023.06.166 | |
| 520 | 3 | _aThe development of the hydrogen industry brings new technological challenges. Solid oxide fuel cells (SOFCs) seem to be one of the leading devices for hydrogen conversion and its production while operating in its reverse mode (as an electrolyser). Fine-tuning of SOFC microstructure might extend cells life and boost their performance. The article presents original numerical studies of the performance of solid oxide fuel cells, based on the OpenFuelCell model, extended by fuel and oxidant concentration loss equations. Transport phenomena in the porous structure of the anode functional layer (AFL) and the anode support layer (ASL) were simulated using the modified Fick's law (MFL) and the Knudsen diffusion coefficient. The presented research focuses on the influence of fuel distribution in fuel electrode of SOFC together with reacting zones and on the influence of AFL and ASL microstructure characteristics on cell performance. The studies included porosity in the range of 30%-60% for both types of anode layers. The obtained results showed a significant impact of the porosity characteristics on the SOFC performance and indicated the possible direction for further improvement. Numerical studies have shown that an increase in anode layers porosity of 30% allows for an increase in cell efficiency of even 15%. Experimental, as well as numerical results, showed that above a porosity of 49%, further increasing the porosity has no strong effect on the results. Also, a novelty in the work and an important part of it is the comparison of the impact of microstructure manipulation of the two anodic layers. Improvement of ASL microstructure allows to better, more homogeneous, fuel distribution inside the anode. Additionally, it increases the concentration of the fuel in the functional layer by up to 8%, which leads to increase in SOFC performance. © 2023 Hydrogen Energy Publications LLC | |
| 650 | 1 | 4 | _aCOMPUTATIONAL FLUID DYNAMICS |
| 650 | 1 | 4 | _aGAS DIFFUSION |
| 650 | 1 | 4 | _aHYDROGEN |
| 650 | 1 | 4 | _aMICROSTRUCTURAL MODIFICATIONS |
| 650 | 1 | 4 | _aPOROSITY |
| 650 | 1 | 4 | _aSOLID OXIDE FUEL CELL |
| 700 | 1 | 2 | _aMachaj K. |
| 700 | 1 | 2 | _aKupecki J. |
| 700 | 1 | 2 | _aNiemczyk A. |
| 700 | 1 | 2 | _aMalecha Z. |
| 700 | 1 | 2 | _aBrouwer J. |
| 700 | 1 | 2 | _aPorwisiak D. |
| 856 | 4 | 0 |
_uhttps://drive.google.com/file/d/1dsyCgvbnm9TkiMRvoIT0WuZFJJ6T8aR0/view?usp=drivesdk _zPara ver el documento ingresa a Google con tu cuenta @cicy.edu.mx |
| 942 |
_2Loc _cREF1 |
||
| 008 | 250602s9999 xx |||||s2 |||| ||und|d | ||
| 999 |
_c55301 _d55301 |
||